Experiment Name : Determine the travel rate of flat bars.
Objective of the experiment :
1) To determine the travel rate of flat bars.
2) To determine the RPM of Sprocket which gives motion to flat bars
.
3) To draw a diagram basis on this experiment.
4) To write a short report according to this experiment.
Theory:
Flat bar is one of the most important device to ensure maximum carding action. Carding action happened between cylinder and flat bars. Here wire direction is opposite. Speed direction is opposite.
So it ensure maximum individualization of fibers, neps, short fibers, dirt and dust.
Travel rate of flat = pitch X no of teeth of sprocket X rpm of Sprocket.
Calculation :
Travel Rate of Flat = Pitch X no of Teeth of Sprocket X RPM of Sprocket
Travel Rate = 1.5 X 14 X 0.0715
=1.57 inch per minute
Result : >>>>>>>>>>>>>>>>>>>>>
Conclusion : >>>>>>>>>>>>>>>>>>>>.
